Installation
Extreme Networks Wireless AP3825 Installation Guide
19
Figure 9 Mounting the WS-AP3825 to a Flat Wall or Solid Ceiling
5 Plug the Ethernet cable into the RJ-45 port (and plug the power cord into the power
port, if applicable) on the back of the AP.
LAN/Console Connections
The WS-AP3825 has both a LAN and a Console port. Refer to Figure 1 for the location of
these ports.
During administration and maintenance through the LAN or Console, the AP must have a
power connection through either an Ethernet PoE cable or a DC power supply.
NOTE
Lan/Console connectors with shrouds will not fit into the ports. An optional
jumper cable may be used or the shroud removed.
To Next Page
Loading...
