27
Extreme Networks Wireless AP3825 Installation Guide
5
Specifications
This appendix lists the specifications for the WS-AP3825i and WS-AP3825e access points
and an external 12V DC power supply.
External Power Supplies
WS-AP3825 APs may be powered by IEEE 802.3af compliant PoE cables connected to the
Ethernet ports in the connector bay. This is usually the preferred method of powering for
users that plan to mount the devices on ceilings or high up on walls. You can also power
these APs with optional external power supplies.
Table 3 Specifications for the WS-AP3825i and WS-AP3825e
Item Specification
Enclosure material Metal base, plastic housing
Power source 802.3af compliant PoE PD,
12V DC input
Power consumption < 12.94W (Max.)
Outside dimensions (max) WS-
AP3825e
Length: 190.5mm (7.5")
Width: 145mm to 180.0mm (7.5" to 7.09")
Thickness (not including mounting bracket): 29mm
(1.13") to 38mm (1.5").
Antenna (WS-AP3825i only) 6x internal antennas, single band
Uplink Interface 2x GbE interfaces with PoE
RoHS compliant Yes
Radio Configuration IEEE 802.11ac, a/b/g/n
2.4/5 GHz single-band,
Dual-radio, 3x3:3 MIMO
Operating temperature 32
o
F to 122
o
F (0
o
C to +50
o
C)
Table 4 Universal Specifications for an External Power Supply
Item Specification
Enclosure material Plastic housing
AC Input 100-240V
DC output 12V
Output current (max) 2A
Output power (max) 24W
To Next Page
Loading...
