EasyManua.ls Logo

Extreme Networks IdentiFi Wireless WS-AP3825i User Manual

Extreme Networks IdentiFi Wireless WS-AP3825i
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
IdentiFi™ Wireless
WS-AP3825i & WS-AP3825e Installation Guide
Published August 2015
9034791-01

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Extreme Networks IdentiFi Wireless WS-AP3825i and is the answer not in the manual?

Extreme Networks IdentiFi Wireless WS-AP3825i Specifications

General IconGeneral
ModelWS-AP3825i
Product TypeWireless Access Point
RadioDual Radio
Wireless Standard802.11a/b/g/n/ac
Frequency Bands2.4 GHz, 5 GHz
Maximum Data Rate1.3 Gbps
PoE802.3af/at
AntennaInternal
Mounting OptionsCeiling, Wall
MIMO TechnologyMIMO
Ethernet Ports2 x 10/100/1000BASE-T
SecurityWPA, WPA2, WPA3
Storage Temperature-40°C to 70°C
Humidity Range Operating5% to 95% (non-condensing)
Dimensions200 x 200 x 45 mm

Summary

About This Guide

Who Should Use This Guide

Identifies the target audience for the installation guide.

How to Use This Guide

Provides guidance on effectively reading and utilizing the manual.

1 Introduction

About the WS-AP3825i and WS-AP3825e

Provides an overview of the two wireless access point models.

WS-AP3825 Overview

Details the features and models of the WS-AP3825 access point.

WS-AP3825 LED Indicators

Explains the status indicators on the WS-AP3825 access point.

Console Port

Details the RJ45 console port for debug purposes.

LAN Port

Describes the two RJ45 LAN ports and their capabilities.

6 Installation

Unpacking the WS-AP3825

Steps for safely opening and verifying the access point contents.

Accessories

Lists available accessories for the WS-AP3825 access point.

Mounting the WS-AP3825 to a Drop Ceiling

Details on attaching the AP to a drop ceiling using brackets.

Mounting the WS-AP3825 to a Wall or Solid Ceiling

Instructions for mounting the AP to a wall or solid ceiling.

LAN/Console Connections

How to connect LAN and console ports on the AP.

Power Connections

Explains the different methods for powering the access point.

Configuring AP Channel Settings

Instructions for setting radio channels, modes, and power.

5 Specifications

External Power Supplies

Details specifications for the external 12V DC power supply.

Internal Antenna Access Points

Specifications for the internal antennas of the WS-AP3825i model.

Horizontal Radiation Pattern 2.4 GHz

Graphical representation of the horizontal radiation pattern for 2.4 GHz.

Vertical Radiation Pattern 2.4 GHz

Graphical representation of the vertical radiation pattern for 2.4 GHz.

Horizontal Radiation Pattern 5 GHz

Graphical representation of the horizontal radiation pattern for 5 GHz.

Vertical Radiation Pattern 5 GHz

Graphical representation of the vertical radiation pattern for 5 GHz.

External Antennas

Lists certified external antennas for the WS-AP3825e model.

6 Regulatory Information

United States

Provides FCC and USA conformance standards for the device.

Canada

Details Industry Canada compliance statements and standards.

European Community

Information on EU compliance, R&TTE Directive, and country declarations.

European Spectrum Usage Rules

Usage rules and restrictions for radio frequencies across European countries.

Certifications of Other Countries

Lists compliance standards and approvals for various other countries.

RF Safety Distance

Specifies minimum separation distances for RF safety.

Related product manuals