EZ-ACCESS Modular Ramp User Manual

- 2 -
ASSEMBLYMANUAL
For EZ-ACCESS
®
Modular Ramp Systems
ATTENTION INSTALLER:
 For residential use only!
 850 lb. weight capacity
 Read all instructions, including ‘PERIODIC MAINTENANCE AND SAFETY,' prior to ramp
assembly
 Please leave this ASSEMBLY MANUAL
with the end user
ATTENTION END USER:
 850 lb. weight capacity
 Please read and become familiar with the ‘PERIODIC MAINTENANCE AND SAFETY’ section
of this manual
 Fill out and return warranty registration
TOOLS TYPICALLY REQUIRED:
 1/2″
SOCKET OR 1/2″ WRENCH
 9/16″
SOCKET OR 9/16″ WRENCH
 5/16″
DRILL BIT (IF BRACE ASSEMBLIES ARE USED)
 1/8″
DRILL BIT
 1/4″
MASONRY DRILL BIT (USED WHEN INSTALLING TO CONCRETE PORCH, STEP, ETC.)
 5/32″
ALLEN WRENCH (INCLUDED)
 3/16″
ALLEN WRENCH (INCLUDED)
 #2
PHILLIPS HEAD SCREW DRIVER

BOX KNIFE
 25’
TAPE MEASURE

HAMMER

LEVEL

RUBBER MALLET

FILE

POWER DRILL

HACKSAW (FOR OPTIONAL HANDRAIL KITS)

DIGGING TOOLS (IF AN OBSTACLE NEEDS TO BE REMOVED)

TWO ABLE-BODIED PERSONS NEEDED FOR INSTALLATION
VIEW PACKING LIST: Each ramp system is shipped with a packing list. Be sure to check that all
items and tools are present before starting installation.

EZ-ACCESS Modular Ramp Specifications

General

Brand	EZ-ACCESS
Model	Modular Ramp
Category	Lifting Systems
Language	English