- 9 -
2.2.5.
Lift each corner of the platform and install a base foot on each support tube
oriented so that the foot extends under the platform as shown in FIG. 2.4.
Make sure the feet are fully engaged on the tubes and tighten the thumb
screw on each foot securely.
NOTE:
If installing on soft soil it may be
necessary to set the base foot on a concrete pad.
2.2.6.
Adjust the final height of the platform.
2.2.7.
Adjust legs one at a time by loosening the set screws in the platform corner
pockets. Using a level, adjust the platform height and re-tighten.
2.2.8.
Once the final height has been adjusted, tighten the second set screw in each
platform corner pocket.
2.2.9.
Ensure that all set screws are secure and install plugs in the top of each
support tube if not done previously.
To Next Page
Loading...
Need help?
General
