5
20°
Limited by PIR detection technology, the camera may fail to detect motion when environment temperature is close to
human body temperature or someone approaches the PIR sensor vertically.
• It is recommended to set detection sensitivity on the EZVIZ app when selecting location. Thus you can verify if motion can be
detected in the camera’s placement and adjust the sensitivity based on the size and distance of detected object.
Important Notes on Reducing False Alarms:
• Do not install the camera under strong light conditions, including sunshine, bright lamp lights, etc.
• Do not place the camera near any outlets, including the air conditioner vents, humidier outlets, the heat transfer
vents of projectors, etc
• Do not install the camera at places with strong wind.
• Do not install the camera in front of a mirror.
• Keep the camera at least 1 meter away from any wireless devices, including Wi-Fi routers and phones in order to avoid
wireless interference.
2� Install the Micro SD Card (Optional)
1. Open the bigger silicone cover on the camera.
2. Insert a micro SD card (sold separately) into the card slot as shon in the gure below.
3. Place the cover back on.
After installing the micro SD card, you should initialize the card in the EZVIZ app before using it.
4. In the EZVIZ app, tap the Record List in the Device Settings interface to check the SD card status.
To Next Page
Loading...
