4
If you want to change your camera's Wi-Fi, press and hold the reset button for 5 seconds and repeat the steps above.
Installation
1� Installation Location
Choose a location with a clear, unblocked field of view and with a good wireless signal to the camera. Please keep the
following tips in mind:
• Remove the protective lm from the lens.
• Make sure the wall is strong enough to withstand three times the weight of the camera.
• Installation height: Less than 6.6 ft(2 m) above the ground.
• Recommended installation angle: Tilt down 15 degrees.
• It is recommended to set detection sensitivity on EZVIZ app when selecting location. Thus you can verify if motion can be
detected in the camera’s placement and adjust the sensitivity based on the size and distance of detected object.
To Next Page
Loading...
