Reviewing Hardware Specifications
Platform Guide: 8400 and 8800 8 - 3
8800 specifications
The following specifications apply to only the 8800 IP Application Switch
platform.
Only optics modules provided by F5 Networks are supported in this
platform.
Specifications are subject to change without notification.
Item Specification
Dimensions 3.5"H x 19"W x 24"D (per unit) 2U industry standard
rack-mount chassis
Weight 47 lbs. per unit
Processor Two Dual-Core Opteron 2.6 GHz
ASIC Packet Velocity ASICâ„¢ 10 (PVA 10)
Network Interfaces 12x10/100/1000 Copper ports
12x1000Base-X SFP Fiber ports
1000BASE-SX - 850nm (LC Connector, 6 modules
included)
1000BASE-LX - 1310nm (LC Connector, optional)
2x10 Gigabit XFP ports
10GBASE-SR - 850nm (LC Connector, optional)
1x10/100 Ethernet Management port
Hard Drive Capacity 512 MB flash with 80 Gigabyte hard drive
RAM 2 GB (expandable to 4 GB)
Power supply type Two 460W 90/240 +/- 10% VAC AUTO Switching
Input Voltage and
Current
90-132 9A
80-264 4A
Typical power
consumption
460W (AC)
Heat generated 1778 BTU/hour
Table 8.3 The 8800 IP Application Switch platform specification
To Next Page
Loading...