6
ENGLISH
INDEX
1. COMPONENTS pag.7
3. DIMENSIONS pag.7
2. TECHNICAL SPECIFICATIONS pag.7
4. ELECTRICAL CONNECTIONS pag.8
5. INSTALLATION pag.8
5.1. PRELIMINARY CHECKS pag.8
5.2 INSTALLATION DIMENSIONS pag.8
5.3. INSTALLING THE OPERATOR pag.8
5.4. WIRING THE OPERATOR pag.9
5.5. POSITIONING THE MECHANICAL STOPS pag.10
6. AUTOMATED SYSTEM TEST pag.10
7. MANUAL MODE OPERATION pag.10
8. SPECIAL APPLICATIONS pag.10
9. MAINTENANCE pag.10
10. REPAIRS pag.10
11. ACCESSORIES pag.10
CE DECLARATION OF CONFORMITY FOR MACHINES
(DIRECTIVE 98/37/EC)
Manufacturer: FAAC S.p.A.
Address:
Via Benini, 1 - 40069 - Zola Predosa - BOLOGNA - ITALY
Declares that: Operator mod. 391 - 391 E powered on 230Vac
• is built to be integrated into a machine or to be assembled with other machinery to create a machine under the provisions of
Directive 98/37/EC;
• conforms to the essential safety requirements of the following EEC directives:
2006/95/EC Low Voltage directive.
2004/108/EC Electromagnetic Compatibility directive.
and also declares that it is prohibited to put into service the machinery until the machine in which it will be integrated or of which it will
become a component has been identified and declared as conforming to the conditions of Directive 89/392/EEC and subsequent
modifications assimilated in Italian National legislation under Presidential decree No.459 of 24 July 1996.
Bologna, 23-01-2008
The Managing Director
A. Bassi
To Next Page
Loading...
