FAAC C850 - CE Declaration of Conformity; Machine Declaration Details; Control Board Declaration Details

C850 2 532015 - Rev.B
ENGLISH
Translation of the original instructions
Manufacturer: FAAC S.p.A.
Address: Via Calari, 10 - 40069 Zola Predosa BOLOGNA - ITALY
Declares that: Operator mod. C850
is built to be integrated into a machine or to be assembled with other machinery to create a machine under the
provisions of Directive 2006/42/CE;
conforms to the essential safety requirements of the following EEC directives:
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility Directive
and also declares that it is prohibited to put into service the machinery until the machine in which it will be
integrated or of which it will become a component has been identifi ed and declared as conforming to the
conditions of Directive 2006/42/EEC and subsequent amendments.
Bologna,
01-01-2012
The Managing Director
A. Marcellan
CE DECLARATION OF CONFORMITY FOR MACHINES
(DIRECTIVE 2006/42/EC)
CE DECLARATION OF CONFORMITY FOR
CONTROL BOARD
Manufacturer: FAAC S.p.A.
Address: Via Calari, 10 - 40069 Zola Predosa BOLOGNA
- ITALY
Declares that: The E850 control board
• conforms to the essential safety requirements of the following EEC directives:
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility Directive
Additional information:
This product underwent a test in a typical uniform confi guration
(all products manufactured by FAAC S.p.A.).
Bologna, 01-01-2012
The Managing Director
A. Marcellan