Page | 5
The E145S Control Board also allows for the use of FAAC BUS 2easy photocells which allow for simpler cabling and a reduced
power consumption. FAAC BUS 2easy photocells also remove the need for additional wiring for a monitoring circuit as it is
carried through our proprietary FAAC BUS 2easycommunication protocol (Please note that FAAC BUS photocells are only
compatible with FAAC Control Boards and those using the BUS Terminal or using the BUS Relay Interface Board).
Connection of FAAC BUS 2Easy Photocells
Connection of FAAC BUS 2easy Safecoders and S800 Encoders
The E145S Control Board also allows for the use of FAAC BUS 2easy Safecoders and the S800 Encoders on the 230v versions.
This allows for the control board to have positional accuracy and allows for the possibility of inherent obstacle detection (Force
Testing with the use a calibrated instrument to BS EN 12445/12453 norms (such as the Microtronics Blueforce Tester, available
from FAAC UK) will be required to confirm suitability but please note that additional devices maybe required such as Safety
To Next Page
Loading...
