FAAC E550 - Function Logics

9
ENGLISH
Tab. 4/a
Tab. 4/b
10 FUNCTION LOGICS
LOGIC “E” PULSES
STATUS OF THE
AUTOMATED SYSTEM
OPEN FSW CL FSW OP STOP
CLOSED opens
(1)
no effect
(function Ad excluded)
no effect
(inhibits opening)
no effect
(inhibits opening)
OPENING stops operation no effect
see
programming
stops operation
OPEN closes
(1)
no effect
(function Ad excluded)
no effect stops operation
CLOSING
reverses immediately
at opening
reverses immediately
at opening
no effect stops operation
STOPPED closes
(1)
inhibits closing no effect
no effect
(inhibits opening)
LOGIC “EP” PULSES
STATUS OF THE
AUTOMATED SYSTEM
OPEN FSW CL FSW OP STOP
CLOSED opens
(1)
no effect
(function Ad excluded)
no effect
(inhibits opening)
no effect
(inhibits opening)
OPENING stops operation no effect
see
programming
stops operation
OPEN closes
(1)
no effect
(function Ad excluded)
no effect stops operation
CLOSING stops operation
reverses immediately
at opening
no effect stops operation
STOPPED
restarts in opposite
direction (always closes
after a Stop)
inhibits closing no effect
no effect
(inhibits opening)
(1)
With pre-flashing selected, movement begins after the set pre-flashing time.
When the Encoder is tripped, this causes stop at opening and reverse at closing.
Tab. 4/c
Tab. 4/d
LOGIC “A” PULSES
STATUS OF THE
AUTOMATED SYSTEM
OPEN FSW CL FSW OP STOP
CLOSED
opens and closes again
after pause time
(1 )
no effect
(function Ad excluded)
no effect
(inhibits opening)
no effect
(inhibits opening)
OPENING no effect no effect
see
programming
stops operation
OPEN IN PAUSE recharges pause time
no effect
(inhibits closing)
no effect stops operation
CLOSING
reverses immediately
at opening
reverses immediately
at opening
no effect stops operation
STOPPED closes
(1)
no effect
(inhibits closing)
no effect
no effect
(inhibits opening)
LOGIC “AP” PULSES
STATUS OF THE
AUTOMATED SYSTEM
OPEN FSW CL FSW OP STOP
CLOSED
opens and closes again
after pause time
(1 )
no effect
(function Ad excluded)
nessun effetto
(inibisce apertura)
no effect
(inhibits opening)
OPENING stops operation no effect
see
programming
stops operation
OPEN IN PAUSE stops operation
no effect
(inhibits closing)
no effect stops operation
CLOSING
reverses immediately
at opening
reverses immediately
at opening
no effect stops operation
STOPPED closes
(1)
no effect
(inhibits closing)
no effect
no effect
(inhibits opening)