1
ENGLISH
INDEX
1 WARNINGS ............................................................................................................................................................. 3
2 TECHNICAL SPECIFICATIONS .................................................................................................................................. 3
3 OPERATING PARAMETERS ....................................................................................................................................... 3
4 E550 LAY-OUT AND COMPONENTS ........................................................................................................................ 3
4.1 DESCRIPTION OF COMPONENTS ............................................................................................................................ 3
5 ELECTRICAL CONNECTIONS ................................................................................................................................... 4
5.1 DESCRIPTION OF CONNECTIONS ............................................................................................................................. 4
5.1.1 TERMINAL BOARD J1 (high voltage) ..........................................................................................................................4
5.1.2 TERMINAL BOARD J2 (high voltage) ..........................................................................................................................4
5.1.3 TERMINAL BOARD J3 (low voltage) ............................................................................................................................4
5.1.4. CONNECTOR J4 (low voltage) ..................................................................................................................................5
6 SIGNALLING LEDS (status of inputs) ....................................................................................................................... 5
7 PROGRAMMING .................................................................................................................................................... 5
7.1 BASIC PROGRAMMING ........................................................................................................................................... 6
7.2 ADJUSTMENT OF OPENING AND CLOSING LIMIT SWITCHES ..................................................................................... 6
7.3 ROTATION DIRECTION CHECK .................................................................................................................................. 6
7.4 ADVANCED PROGRAMMING .................................................................................................................................. 7
7.5 IDENTIFYING THE DOOR POSITION LIMITS ................................................................................................................ 7
8 AUTOMATED SYSTEM TEST ....................................................................................................................................... 9
9 OPERATION OF ENCODER AND ELECTRONIC CLUTCH (ANTI-CRUSHING) ................................................................ 9
10 FUNCTION LOGICS ............................................................................................................................................... 10
WARNINGS
• Attention! To ensure the safety of people, it is important that you read all the following instructions.
• Incorrect installation or incorrect use of the product could cause serious harm to people.
• Carefully read the instructions before beginning to install the product and keep for future reference.
• The symbol highlights notes that are important for personal safety and the protection of the automated
system.
• The symbol calls your attention to notes on product specifications or operation.
CE DECLARATION OF CONFORMITY
Manufacturer: FAAC S.p.A.
Address: Via Calari, 10 - 40069 Zola Predosa BOLOGNA - ITALY
Declares that: Control board E550
• conforms to the essential safety requirements of the following EEC directives
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility Directive
Additional note:
This product has undergone testing in a typical
standard configuration (all products built by FAAC S.p.A. )
Bologna, 01-08-2013
The Managing Director
A. Marcellan
To Next Page
Loading...
