FAAC HOME SHIELD - Page 23

23
How to access the CUSTOMISING
menu
After calling the telephone transmitter, input the
access code (6 digits). At start-up, the access code is
123456 (modifiable code).
The welcoming message signals the system’s current
status, for example:
- “alarm ON or OFF”
- “no signalling”; “alarm in progress”; or “discharged
batteries…”
- “ambient temperature 19°C”
and, then, the transmission control unit reads the main
menu.
Press push-button to access the customising
menu.
4
Operation of the telephone
transmitter
4
Hello, type in the access code
1
3
2
5
4
6
Alarm ON.
No signalling.
The internal temperature is 19˚.
Main menu
- to enable the alarm, press
- to listen, press
- to speak, press
- to customise the telephone
transmitter, press
- to hang up, press twice
1
2
3
4
#
Customising menu
- to modify the telephone numbers to
be called, press
- to modify the voice message, press
- to modify the access code, press
- to modify the time, press
- to modify the date, press
1
2
3
4
5
Alarm ON / Alarm OFF
Maintenance Program mode
2 secs.
Alarm memory-stored / In progress
System sabotage alarm
Discharged batteries
Peripheral units fault /
Telephone line fault
Passage open signal
Alarm ON / Alarm OFF
Maintenance Program mode
2 secs.
Alarm memory-stored / In progress
System sabotage alarm
Discharged batteries
Peripheral units fault /
Telephone line fault
Passage open signal
Alarm ON / Alarm OFF
Maintenance Program mode
2 secs.
Alarm memory-stored / In progress
System sabotage alarm
Discharged batteries
Peripheral units fault /
Telephone line fault
Passage open signal
Impor
Impor
tant:
tant:
- wait for the silent pauses before pressing a key,
- press to return to the previous menu,
- press to command closure of the
communication to the telephone transmitter.
Customising