FAAC HOME SHIELD - Deleting systems devices

This operation is carried out from the control keypad.
Before a device is eliminated, a LEARNING session
must be carried out:
- type in the access code,
- press the configuration push-button,
- select the INSTALLATION menu and confirm.
The message OPEN THE CONTROL UNIT
COMPARTMENT is shown, if this compartment is not
already open.You have one minute to open it. When this
time has elapsed, opening the control unit trips the
sabotage alarm. Press the OFF Key of the remote-
control to stop the alarm.
- select the DELETE DEVICES menu and confirm,
- select the device to be eliminated, by pressing keys
and or by directly pressing the TEST push-
button of the device to be eliminated (not including
remote-controls),
- the identification number and, subsequently, the name
of the device will be shown after confirmation.
- press the key until you see the message
PLEASE CONFIRM in the display, and then confirm.
OK
OK
+
-
+
-
Deleting one device at a
time
C
INFO
OK
+
-
O
K
O
K
+
-
C
INFO
+
-
O
K
O
K
+
-
C
INFO
OK
O
K
O
K
+
-
C
INFOINFO
+
-
O
K
O
K
+
-
C
INFO
+
-
O
K
O
K
+
-
C
INFO
+
-
O
K
O
K
+
-
C
INFO
OK
O
K
O
K
+
-
C
IN
FO
IN
FO
OK
O
K
O
K
+
-
C
INFO
OK
Select a device with the +
and - push-buttons of the
keypad
Select a device by
pressing the relevant
TEST push-button
Deleting system’s devices
Deleting
28