FAAC HOME SHIELD - The Control Unit Telephone Transmitter

Customising the system
22
Calling the control unit (method 1)
From a different telephone line, mobile or fixed, type in
the number of the system.
The telephone transmitter engages the line after 5-10
ring tones.
Calling the control unit (method 2)
To be used when the transmitter coexists with a
telephone answering system or other automatically
enabled equipment.
The control unit telephone
transmitter
Wait for 1-2 ring tones
"Tuu"
Wait for 5-10 ring tones
"Tuu"
The transmitter answers
Method 1
Method 2
Alarm ON / Alarm OFF
Maintenance Program mode
2 secs.
Alarm memory-stored / In progress
System sabotage alarm
Discharged batteries
Peripheral units fault /
Telephone line fault
Passage open signal
Alarm ON / Alarm OFF
Maintenance Program mode
2 secs.
Alarm memory-stored / In progress
System sabotage alarm
Discharged batteries
Peripheral units fault /
Telephone line fault
Passage open signal
Hang up and wait for 10 seconds
Type in the system's number again
The transmitter answers after 1 or 2
ring tones
Type in the number of the system from an
external line
Type in the number of the system from an
external line
Hello, please type in the access code
Hello, please type in the access code
Impor
Impor
tant:
tant:
To modify the settings (telephone numbers, access
codes, time…), the control unit must be in
MAINTENANCE PROGRAM mode before making the
call.
Customising