14
Selecting the position
We advise you to install the control keypad near one of
the main accesses (for example: entrance door).
It must be accessible to the user and can be wall
mounted, at a height of about 1.50 m.
Securing
Unscrew the enclosure closing screw and remove the
front cover.
Secure the keypad support, observing the positioning
precautions (screws and expansion plugs supplied).
Start-up
Remove the plastic strip from the batteries.
Close the enclosure and re-secure the closing screw.
The control keypad
Attention:
Attention:
If the control keypad is installed near a detector
(opening or movement sensor), a delayed alarm must
be selected for the detector.
Installing the system devices
Installation
To Next Page
Loading...