5
Control keypad
It must be installed on a wall. It provides information on
the system’s status, signalling any open doors or
windows.
By means of an access code, it enables the alarm to
be enabled area by area, totally enabled or disabled.
It provides a list of the latest events and indicates the
external temperature (if an outdoor siren is connected
to the system). It also enables the system to be
customised.
Customised configuration
We recommend the following to facilitate system start-up:
- in the table below, write the configuration of your
system (type of device, positioning, configuration,
etc…),
- identify each sensor with a number.
Note that the control keypad makes it possible to
assign names, previously saved inside the system.
To Next Page
Loading...