Need help?Do you have a question about the Fagor AXD 3.100 and is the answer not in the manual?
General| Brand | Fagor |
|---|---|
| Model | AXD 3.100 |
| Category | Servo Drives |
| Language | English |
Requirements for personnel authorized to repair and handle the units.
Safety measures to prevent personal injury during handling and operation.
Measures to prevent physical damage to the product during installation and operation.
Steps for configuring and installing the DDS system, including component selection.
Description and technical data for PS-25B4 and PS-65A non-regenerative power supplies.
Overview of XPS-25 and XPS-65 regenerative power supplies and their technical data.
Information on RPS-80, RPS-75, RPS-45, and RPS-20 power supplies, including technical data.
Technical data and installation of external ballast resistors with thermostats and fans.
Technical data and function of the APS-24 auxiliary power supply module.
Guide for selecting motors based on mechanical and dynamic response characteristics.
Procedure for selecting motors and drives for spindle applications.
Criteria for selecting power supplies based on motor and drive requirements.
Guide for selecting ballast resistors based on calculated braking energy.
Diagrams and guidelines for connecting the DDS system to three-phase mains.
Technical data and recommended fuses for power supplies and compact drives.
Mandatory installation of mains filters for electromagnetic compatibility.
Considerations for placing the DDS servo drive system and running cables.
Guidelines for electrical installation, including EMC compliance.
Mandatory instructions for ensuring electromagnetic compatibility during installation.
Procedure for complete system installation, including module setup and connections.
Guidelines for power bus, chassis, and internal bus connections.
Mandatory procedures for connecting modules to the ground terminal.
Configurations for external ballast resistors with power supplies and compact drives.
Guidelines for connecting 24 V DC auxiliary power supplies to control circuits.
Details on motor feedback, direct feedback, encoder simulation, and analog commands.
Configuration of SERCOS communication ring between CNC and drives.
Establishing communication through CAN bus between drives and CNC.
Connection diagram of an SPD drive with FM7 motor and TTL encoder.
Connection diagram for AXD drive with FKM motor and E3 encoder.
Connection diagram for AXD drive with FXM motor and E1 encoder.
Connection diagram of an ACD compact drive with FXM motor and encoder.
Connection diagram of SCD compact drive with FM7 motor and TTL encoder.
System and maneuver diagrams for PS-65A power supply.
System and maneuver diagrams for PS-25B4 power supply.
Sales reference structure for AXD, SPD, MMC modular drives.
Sales reference structure for ACD, SCD compact drives.
To Next Page
