Installation
INSTALLATION
Connection of the control and communications signals
8.
307
DDS
HARDWARE
Ref.1310
CAN connection with a FAGOR 8055i CNC
The CAN connection of the FAGOR 8055i CNC will be made through the
CAN DRIVES connector on the top rear of the module. See figure:
For further information, see the installation manual of the FAGOR 8055i
CNC.
F. H8/40
CAN connector of the FAGOR 8055i CNC.
X9 X10 X11 X12 X13
X2 X4X3 X6X5
X7
X1
X8
+24V
0V
1
CAN DRIVESCAN I/Os
To Next Page
Loading...
