02/05/2020 23
SERVICE MANUAL
CONVEYOR BELT
17. SAFETY ASPECTS OF THE MACHINE:
• Doors with magnetic switches: When the door(s) is/are lifted, the prewash, wash, rinse and basket feed
functions are stopped.
• Doors with hook fastenings: The doors have hook fastenings to prevent them from falling when fulling open.
• Safety Lock: If any element blocks the feed, the Safety Lock system, on detecting the obstruction, stops the feed
to prevent any element from being forced.
• Limit switch: This switch, mounted on the output bench, stops the machine when a basket touches it on
reaching the end of the output bench.
•
Access to motors, pumps and live areas is protected by closed panels secured with bolts. It is strictly forbidden to
open any panel and/or access the interior of the appliance or the electric box; only a qualified and authorised
Technical Assistance Service may install, repair or carry out maintenance work to the appliance.
Use of the machine must be supervised by an operator.
It is dangerous to touch the mains switch with wet hands.
If the feed belt is blocked, remove the obstacle before restarting the appliance.
Before removing objects that have fallen inside the machine, the appliance must
be at a complete standstill and disconnected.
Do not insert hands in the machine when it is running.
To avoid the risk of entanglement, do not approac
especially if wearing jewellery or loose clothing.
In the event of breakdown and/or the incorrect operation of the machine, switch
off the appliance at the mains and refrain from carrying out direct intervention
Risk of trapping / crushing
Heat-related risks
To Next Page
Loading...
