Fagor CCO-120 - 19.7. DISPENSERS (DETERGENT;RINSE AID); 19.7.1. DISPENSER HYDRAULIC CONNECTION

02/05/2020 27
SERVICE MANUAL
CONVEYOR BELT
DISHWASHERS
switch (please refer to the corresponding chapter).
The default setting of the appliance is set to alternate heating ALT. If simultaneous heating SIM is required
(simultaneous heating of the drum and the wash tank), this change must be reflected in Fig. 11.
On completion of the electrical installation, replace and fasten the covers.
ALT/SIM connection in CCO-120 and CCO-160
ALT
(alternate heating)
Fig. 10
SIM
(simultaneous heating)
Fig. 11
FACTORY ELECTRICAL SETTING
H
2
O < 15ºC
ALT/SIM connection in CCO-180, CCO-225, CCO-270 and CCO-320
ALT
(alternate heating)
Fig. 10
SIM
(simultaneous heating)
Fig. 11
FACTORY ELECTRICAL SETTING
H
2
O < 15ºC