INDEX
Tools ................................................................................................... 1
Tool calibration ................................................................................. 2
General examples ............................................................................ 5
Canned cycles ................................................................................ 11
«C» axis programming..................................................................33
Profile Editor....................................................................................37
User screen customizing programs........................................... 43
The cutting speeds and feedrates appearing in this manual are only approximate,
they may vary depending on the material of the part and the tools used. When
machining one of the parts of these examples, use the speeds recommended by
the tool manufacturer.
The tool number will also be different depending on the machine.
========= 0 ========
The information described in this manual may be subject to variations due to technical
modifications.
FAGOR AUTOMATION, S.Coop. Ltda. reserves the right to modify the contents of
the manual without prior notice.
WARNING
To Next Page
Loading...
Need help?
General
