English
30
Service and spares
Please complete the appliance details below and keep
them safe for future reference - this information will enable
us to accurately identify your particular appliance and help
us to help you. Filling this in now will save you time and in-
convenience if you later have a problem with your appli-
ance. It may also be of benefit to keep your purchase re-
ceipt with this leaflet. You may be required to produce the
receipt to validate a warranty field visit.
Fuel Type:
Ceramic Electric
Name of Appliance & Colour*
Appliance Serial Number *
Retailers Name & Address
Date of Purchase
Installers Name & Address
Date of Installation
* This information is on the appliance data badge.
If you have a problem
In the unlikely event that you have a problem with your ap-
pliance, please refer to rest of this booklet, especially the
problem solving section, first to check that you are using
the appliance correctly.
If you are still having difficulty, contact your retailer
Please note
If your appliance is outside the warranty period, our serv-
ice provider may charge for this visit.
If you request an engineer to visit and the fault is not the
responsibility of the manufacturer, our service provider re-
serves the right to make a charge.
Appointments not kept by you may be subject to a charge.
Out of Warranty
We recommend that our appliances are serviced regularly
throughout their life to maintain the best performance and
efficiency.
Service work should only be carried out by technically
competent and suitably qualified personnel.
Spare Parts
To maintain optimum and safe performance, only use
genuine spare parts. Do not use re-conditioned or unau-
thorised gas controls. Contact your retailer.
Installation
This appliance is designed for domestic cooking only. Use
for any other purpose could invalidate any warranty or li-
ability claim.
Safety Requirements/Regulations
This appliance must be installed by a qualified electrician
to comply with the relevant regulations and also the local
electricity supply company requirements. Read the in-
structions before installing or using this appliance.
Before installation, ensure that cooker is suitable for your
supply voltage. See the data badge.
You will need the following equipment to complete the
cooker installation satisfactorily
Multimeter (for electrical checks)
Steel tape measure
Cross head screwdriver
Spirit level
Cooker levelling tool (provided in pack)
Positioning the Cooker
The diagrams show the minimum recommended distance
from the cooker to nearby surfaces.
To Next Page
Loading...
