Falcon Classic - Installation Instructions; Service, Spares, and Warranty

INSTALLATION
Check the appliance is electrically safe and gas sound when you have nished.
27
Checking the Parts:
You will need the following equipment to
complete the cooker installation satisfactorily:
• Flexible gas hose.
• Gas pressure tester/manometer.
• Multimeter: For electrical checks.
You will also need the following tools:
1. Electric drill
2. Masonry drill bit (only required if tting the cooker on a
stone or concrete oor)
3. Wall plugs (only required if tting the cooker on a stone
or concrete oor)
4. Steel tape measure
5. Cross head screwdriver
6. Flat head screwdriver
7. 4 mm & 3 mm Allen keys
8. Spirit level
9. Pencil
10. Adjustable spanner
11. 13 mm spanner or socket wrench
12. Screws for tting the restraining chain and bracket
4 pan supports Splashback (Classic only)
ArtNo.110-0002 110 pan supports
ArtNo.421-0002 - Splashback
Griddle plate Grill pan & trivet
Flat shelves Handyrack
ArtNo.324-0003 Handyrack
Roasting tin Plinth (2-piece model shown)
ArtNo.324-0004 Roasting tin
Handles Stability location bracket
ArtNo.210-0014 - Classic handles
Stability bracket Restraining chain & hook
ArtNo.020-0021 - Restraining
chain & hook
Conduit box