6
SAFETY
Retain This User Manual
SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be followed
during installation and maintenance of the UPS and batteries.
Please read all instructions before operating the equipment and save this manual for future reference.
All the models presented herein are designed for installation and use in a protected environment, free
of contamination.
This UPS operates from utility power and contains several high current batteries; this information is
important to all personnel involved. Please read this manual first before continuing to unpack, install or
operate this UPS.
Warnings
CAUTION: Risk of electric shock. Do not remove cover. No user serviceable parts inside. Refer
servicing to qualified service personnel.
CAUTION - Risk of Electric Shock - Battery circuit is not isolated from AC input; hazardous voltage may
exist between battery terminals and ground. Test before touching.
WARNING: To reduce the risk of fire or electrical shock, replace only with the same type and rating of
fuse.
CAUTION - To reduce the risk of fire, connect only to a circuit provided with 15, 20 or 30 amperes
maximum branch circuit overcurrent protection in accordance with the National Electric Code,
ANSI/NFPA 70. (U.S. Installations only.)
Adhere to all local and national electrical codes.
This UPS should be installed according to the instructions in this manual. Failure to do so could result
in unsafe operation and could invalidate your warranty.
This device is not intended for life support applications.
The maximum UPS output load (in watts) must never exceed that shown on the UPS rating label.
Do not connect inductive load type equipment that could severely overload the UPS including but not
limited to motors, pumps, vacuums or high voltage contactor coils.
The UPS, battery packs and battery banks are heavy. Take proper precautions when lifting or moving
them.
If using an external maintenance bypass switch, assure the UPS is manually placed in bypass mode
before operating the maintenance bypass switch. Failure to follow this procedure will result in damage
to this unit.
To Next Page
Loading...
Need help?
General
