fantastic furniture Java Console Table - 13

Step 14
Page 13fantasticfurniture.com.au
Step 15
You will need
Slide drawer base (P10) into
the grooves on panels (P6, P7, P8).
Repeat this step for the other drawer assembly.
X
2
(P10)
12 x Screws
38mm (H17)
Phillips Head
Screwdriver
Slide drawer base (P10) into the grooves on panels (P6, P7, P8).
Attach drawer back (P9) to an assembled drawer with 6 x screws (H17),
using a phillips head screwdriver as shown.
Repeat this step for the other drawer assembly.
X
2
H17
(P7)
(P8)
(P11)
H17
(P9)
(P7)
(P8)
(P6)
Ensure the pre-drilled holes on drawer sides (P7, P8)
align with holes on back panel (P9),
and the holes on back panel (P9)
H17
align with the holes on
drawer support (P11).
(P6)