EasyManua.ls Logo

Fantec GL-35DSR - 4 Appendix; Specifications; Trademarks

Fantec GL-35DSR
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GL-35DSR Appendix
4 Appendix
4.1 Specifications
Internal Hard Drive(s)
• 3.5" SATA-I or SATA-II hard drives (1.5Gb/s or 3.0Gb/s)
• 80GB - 2TB
Interface/Ports
• 10/100/1000Base-TX Auto MDI/MDI-X
• 2x USB host ports for USB drives and printers
Supported USB devices
• USB hard drives (FAT32 only)
• USB printers (RAW protocol)
Supported UPnP clients
• Xbox 360
• PlayStation 3
• iTunes
• DLNA compliant and certified UPnP clients
System Requirements
• PC: Windows XP/Vista/7
• Mac: OS 10.2 or above (Windows OS required to initialize
NAS for the first time)
• Network router or switch
Router/Firewall Requirements
• UPnP
• Port 80 for HTTP control panel
• Port 21 for FTP file server
• Port 6881 for BitTorrent downloads
Power (AC adapter)
• AC Input: 100-240V, 1.3A, 50-60Hz
• DC Output: +5V/4.2A, +12V/3A
Dimensions 17.0cm x 12.0cm x 8.0cm
Operating Temperature/Humidity 5°C ~ 40°C / 10%RH ~ 80%RH non condensing
Storage Temperature/Humidity -20°C ~ 70°C / 5%RH ~ 90%RH non condensing
Note
Design and specifications are subject to change without prior notice and will depend on the current
firmware release.
This manual is based on firmware: FT_2.0.0_20100324.
The diagrams and images contained in this document may not fully represent the actual product
and are there for illustration purposes only.
4.2 Trademarks
• MS-DOS, Microsoft, Windows XP/Vista/7 are trademarks of Microsoft Corporation.
• Apple Macintosh and Mac are trademarks of Apple Computer.
• All other third party brands and names are the property of their respective owners.
EN 35/37