EasyManuals Logo

Fanvil PA2 User Manual

Fanvil PA2
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
1
3 Safety Instruction
Please read the following safety notices before installing or using this unit. They are
crucial for the safe and reliable operation of the device.
Please use the external power supply that is included in the package. Other power
supply may cause damage to the phone and affect the behavior or induce noise.
Before using the external power supply in the package, please check the home
power voltage. Inaccurate power voltage may cause fire and damage.
Please do not damage the power cord. If power cord or plug is impaired, do not use
it because it may cause fire or electric shock.
Do not drop, knock or shake the phone. Rough handling can break internal circuit
boards.
This phone is design for indoor use. Do not install the device in places where there
is direct sunlight. Also do not put the device on carpets or cushions. It may cause
fire or breakdown.
Avoid exposure the phone to high temperature or below 0 or high humidity.
Avoid wetting the unit with any liquid.
Do not attempt to open it. Non-expert handling of the device could damage it.
Consult your authorized dealer for help, or else it may cause fire, electric shock and
breakdown.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it.
Wipe it with a soft cloth that has been slightly dampened in a mild soap and water
solution.
When lightning, do not touch power plug, it may cause an electric shock.
Do not install this phone in an ill-ventilated place. You are in a situation that could
cause bodily injury. Before you work on any equipment, be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for
preventing accidents.

Other manuals for Fanvil PA2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fanvil PA2 and is the answer not in the manual?

Fanvil PA2 Specifications

General IconGeneral
Voice codecsG.711a, G.711u, G.722, G.723.1, G.726-32, G.729ab
Networking standardsIEEE 802.3af
Ethernet LAN data rates10 Mbit/s
Output current2 A
Output voltage12-24 V
Power over Ethernet (PoE)Yes
Power consumption (typical)1.32 W
Supported network protocolsSNTP, VPN L2TP / PPTP / IPSec, SRTP, HTTP, HTTPS, DSCP, MD5, DHCP, PPPoE, STUN
WAN connectionEthernet (RJ-45)
Ethernet LAN (RJ-45) ports1
Product colorBlack
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-30 - 70 °C
Weight and Dimensions IconWeight and Dimensions
Weight250 g
Dimensions (WxDxH)113 x 83 x 28 mm

Related product manuals