Fanvil V65 - Call Management Features; Redial Function; Call Mute; Putting a Call on Hold

Redial
1．Press key, redial a call number.
Call Mute
1．Press to Mute the microphone during the call.
2
．
Press again to un-mute the conversation.
Putting a call on hold
1．Press Hold soft key, caller is put on hold.
2．To retrieve the call press Resume soft key.
3
．
Note: with more than one active call, select desired call with the
navigator key and use the corresponding soft key to hold or resume.
Call transfer
Attended transfer:
1
．
Press Xfer soft key during the active conversation, the call is put
on hold.
2．Dial the second telephone number.
3
．
When the call is answered, then press Xfer soft key to complete
the operation.
Blind transfer:
1
．
Press Xfer soft key during the active conversation, the call will be
on hold.
2．Then enter the 2nd telephone number and press Xfer soft key.
Call forward
1
．
Press Menu > Features > Call Forward.
2．Select the line, the type of forward, enter the destination number
and status, and press OK soft key.
Call conference
1
．
Once in line with 1st caller, press Conf soft key, 1st caller is put on
hold.
2．Then call the 2nd number.
3
．
After, 2nd call is established, press Conf soft key to set up the
conference.
Programmable keys
1．You can configure shortcuts for the programmable keys.
2
．
Press Menu > Basic > Keyboard, select among the configurable
items, and select your desired type and value, press OK key.
Do not disturb
1．Press DND soft key, and enable the device do not disturb mode.
2
．
Or press Menu > Features > DND, and select the Mode and Type,
and press OK key.
Voice mail
1．To access your voice mailbox, press or Menu > Message >
Voice Message, number of messages will be indicated if provided by
your server or pbx.
2．Select the line and press Play to call.
Bluetooth
1．Press Menu > Basic > Bluetooth.
2
．
Press OK soft key to enter the bluetooth open interface. After
opening, press Scan soft key to display the list of bluetooth scanned.
Select any device and press connect.
WiFi
1
．
Press Menu > Basic > WLAN.
2．Press OK soft key to enter the WLAN open interface. After
opening, press Scan soft key to display the list of Wi-Fi scanned.
3
．
Press Enter soft key to enter the available Network, select the
wireless network, press the Connect soft key and enter the password
to connect.
Call list
1
．
Press up navigator key or Menu > CallLog > Local Call Logs
2．Scroll through the list using navigator key.
3．To dial an entry, press Dial soft key or pickup handset or press
or .
Phonebook
Access Phonebook:
1．Press or Contact soft key or Menu > PhoneBook > Local
Contacts.
2．Select All Contacts or other group.
3．To dial an entry, press Dial soft key or pickup handset or press
or .
Add new entry:
1．Press Contact soft key, Press All Contacts or other group > Press
Add.
2．Enter name and number and press OK soft key.