Fanvil X Series User Manual

This Configuration Guide is written as a general guide on how to configure the Fanvil phone
model X4U to work with PBXware 5.3.9.
Video Tutorial
Please refer to the video tutorial explaining setting up Auto Provisioning for Fanvil on PBXware
5.
Requirements
Identifying Phone Model
To start and successfully complete the registration of the Fanvil phone, users need to know
which phone model to set up.
On the back of each Fanvil phone, there is model information that you should check. Although
various phone models can have exactly the same requirements and installation procedures, they
can also have significantly different requirements and installation procedures, so that is why it
is important to know the model you own which results in you setting up the device successfully.
Phone Firmware
Make sure that the phone is loaded with an appropriate firmware version, 2.4.3.
■
To find out the firmware version of the Fanvil phone model, open a new browser window and
■

Fanvil X Series Specifications

General

Brand	Fanvil
Model	X Series
Category	Telephone
Language	English