Fanvil X7 User Manual (English)

Other manuals for Fanvil X7

User Manual162 pages

Quick Installation Guide6 pages

Questions and Answers:

D
Daniel KruegerJul 27, 2025
What to do if my Fanvil X7 IP Phone cannot register to a service provider?
- M
  Molly RichJul 28, 2025
  If your Fanvil IP Phone isn't registering to a service provider, ensure the Ethernet cable is connected to the [Network] port, not the [PC] port. Also, verify that the device has an IP address (check system information; if it displays “Negotiating…”, the device lacks an IP address, indicating a network configuration issue). If the network connection is fine, check your line configurations. If all configurations are correct, contact your service provider for support.
S
Sharon GarciaAug 2, 2025
Why is the audio chopping on my Fanvil IP Phone in hands-free mode?
- M
  mitchelldanielAug 2, 2025
  If you are experiencing audio issues during hands-free speaker mode with your Fanvil IP Phone, it might be due to excessive volume creating feedback between the speaker and the microphone. Try reducing the speaker volume to resolve the issue.
J
Jacob HallAug 8, 2025
Why is the headphone audio poor or low volume on my Fanvil IP Phone?
- B
  Bryan BrownAug 8, 2025
  If you are experiencing poor audio or low volume when using headphones with your Fanvil IP Phone, it could be due to different headphone wire sequences. Use the headphone provided by Fanvil, or consult Fanvil about the wire sequence if you want to use a third-party headphone. Also, check the network conditions, as network bandwidth and delay may not be suitable for audio calls.
A
Andrea HopkinsAug 15, 2025
How to troubleshoot no audio or poor audio in the handset of Fanvil IP Phone?
- D
  Daryl BarreraAug 15, 2025
  If you're experiencing no audio or poor audio through the handset of your Fanvil IP Phone, first, check if the handset is connected to the correct Handset port and not the Headphone port. Then, verify the network conditions, as the network bandwidth and delay may not be suitable for audio calls.
B
Brian BrownAug 20, 2025
What to do if my Fanvil IP Phone could not boot up?
- S
  salazaramandaAug 20, 2025
  If your Fanvil IP Phone isn't booting up, ensure you're using a standard power adapter provided by Fanvil or a PoE switch that meets the specification requirements, and verify it's well-connected to the power source. If you see “POST MODE” on the screen, contact local technical support to restore the phone system.

Fanvil X7 Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Black
Lines quantity	20 lines
Call log entries	1000
Phonebook capacity	2000 entries
Message-waiting indicator (MWI)	Yes
Video codecs	H.264
Video resolutions	320 x 240, 640 x 480 pixels
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	840 x 480 pixels
Wi-Fi	No
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	SIP2.0 UDP/TCP/TLS, RTP/RTCP/SRTP, STUN, DHCP, IPv6, LLDP, PPPoE, 802.1x, L2TP, OpenVPN, SNTP, FTP/TFTP, HTTP/HTTPS, TR-069
Voice codecs	AMR, AMR-WB, G.711a, G.711u, G.722, G.723.1, G.726-32, G.729ab, OPUS, iLBC
Volume control	Buttons
Keypad number of keys	26
Number of function keys	5
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Front camera	-
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 95 %