Creating an Extension
■
Registering a Phone
■
UAD Settings
UAD settings
Log in to the PBXware web administration interface
Open a new browser window and enter the IP address in order to access the PBXware web
■
administration login screen. Example: http://192.168.1.10.
Log in to PBXware with the e-mail address and password.
■
UAD Settings
Navigate to Settings:UAD.
■
Make sure Fanvil UAD is enabled. To check the UAD status, click the Edit icon corresponding
■
to the Fanvil phone.
Make sure Status is set to Active, Auto provisioning is set to No, and DHCP is set to Yes.
■
Click Save.
■
Creating an Extension
Creating Extension
Add an Extension
Navigate to Extensions. Click Add Extension.
■
The standard options window will be shown below.
■
Select a Fanvil phone model from the UAD select box.
■
Select Location: Local or Remote.
■
Local is for all Extensions registered on the LAN and Remote is for all Extensions
registered from remote networks, WAN, Internet, etc.
Click the Next step button.
■
Extension Values
Enter values into the required field text boxes.
To Next Page
Loading...
Need help?
General
