FARMALABOR OPTIMATIC 300 - Positioning; Preparations for Energy Sources; Directions and Maintenace; Commands

To Next Page

To Previous Page

ENGLISH

4.2 POSITIONING

For the positioning of the equipment, provide a minimum space of 100 cm x 100 cm necessary to facilitate

both normal activities and adjustments and maintenance.

Once the machine has been freed from its packaging, transfer it carefully bench having a minimum size of

40 cm x 40 cm, capable of supporting a weight of at least 100 kg.

4.3 PREPARATIONS FOR ENERGY SOURCES

Set up a bipolar single-phase outlet with earth ground at the work site

We accept no responsibility for accidents resulting from bad connections.

5 DIRECTIONS AND MAINTENACE

5.1 COMMANDS

The device is equipped with the following commands:

Fig. 10: Commands

1. Vibration switch (1), Fig. 10;

2. Vibration intensity adjustment knob (2), Fig. 10.

5.2 PRELIMINARY CHECKS AND SETTINGS

Before starting the machine, carry out the following checks:

 Check the ignition of the machine: main switch on the inserted position and on indicator light on,

Fig. 10;

 Check the exact type of capsules that you want to process with the plates mounted on the capsule

filler;

 Check the correct setting of the machine.