FARMALABOR OPTIMATIC 300 - Problem Resolution; List of Applying Legal Abd Technical Specifiction

ENGLISH
31
8 PROBLEM RESOLUTION
Problem
Causes
Resolution
The device doesn’t
switch on
1. The device is non property
connected to the mains;
2. There are problems with the
mains line.
a. Connect the device to
the mains;
b. Check the supply line;
The plate set does not
flow freely
1. Dust is present between the
two plates;
a. Clean the two plates
referring to paragraph
5.7.1, Fig. 41.
9 LIST OF APPLYING LEGAL ABD TECHNICAL SPECIFICTION
The equipment has been conceived and manufactured, conforming to the following legal and technical
specifications:
 Machines Directive;
 Regulations for the prevention of industrial accidents;
 Workers health and safety improvement at work
 Safety improvement at equipment
 Low voltage directive;
 Electromagnetic compatibility directive
The manufacturer reserves the material and intellectual property rights inherent to this publication,
prohibits its issue and duplication, even partially, without his prior written consent.