Farmall 90 - Page 27

SECTION 10 -- ENGINE -- CHAPTER 1
27
11. Remove the circlip (2) and move the front sleeve
(1) in the direction indicated by the arrow until it
is released from the groove on the front axle.
1
2
25039
14
12. Remove the circlip (2) and move the rear sleeve
(1) in the direction indicated by the arrow until it
is released from the groove on the drive.
1
2
25040
15
13. Remove the propeller shaft central support (1)
retaining bolts and extract the shaft together with
the support.
1
25041
16