Fastech Ezi-Servo ALL User Manual

www.fastech.co.kr
61
10. Control I/O Signal
* Teaching signal can be used by two methods; the user assigns actual signal to the
motor, or he clicks ‘Teaching’ icon at the ‘I/O Monitoring’ window of User
Program(GUI).
11) ‘E-Stop’Input
When ‘Emergency stop’ signal is set to ON, the current motion is stopped immediately
without deceleration. E-Stop signal is active in ON level and pulse scale is 10ms or
more.

Fastech Ezi-Servo ALL Specifications

General

Brand	Fastech
Model	Ezi-Servo ALL
Category	Controller
Language	English