What to do if my Faster FlowFAST H Protection Device cabinet does not work?
If your Faster Protection Device cabinet isn't working, there could be a few reasons. First, check the voltage input to the cabinet to ensure the electricity supply hasn't been cut off at the mains. If the electricity supply is ok, the electronic board might be out of order, in that case replace the PCB. Finally, check the fuses and replace them if they are blown.
What to do if Faster FlowFAST H Protection Device shows a “Black-out ” Alarm?
If your Faster Protection Device displays a “Black-out ” Alarm, which indicates a probable exchange of air between the work chamber and the outside (and possible contamination of the environment), check the feeding cable, the connection plug/socket, and the power supply line. You can also press the “ESC” key to silence the alarm.
What to do if my Faster FlowFAST H Protection Device displays a “minimum LAF alarm”?
If your Faster Protection Device displays a “minimum LAF alarm”, which indicates possible contamination of the product, the HEPA filters might be clogged, so replace them. Alternatively, the main motor-fan might not be working; in that case, check the terminal voltage of the power card of the main motor-fan. You may also need to check the F7 fuse on the power card, replace the power card, or replace the microprocessor card.
How to fix “HEPA filters check” alarm on Faster Protection Device?
If your Faster Protection Device displays a “HEPA filters check” alarm, it means that the main HEPA filter is clogged. Replace the HEPA filter to resolve this issue.
What to do if my Faster FlowFAST H shows Alarm “Sensors failure”?
If your Faster Protection Device displays an “Sensors failure” Alarm, it means that there is a failure of sensor XX. Replace the XX sensor.
Why does my Faster FlowFAST H show Alarm: “No encoder input LAF”?
If your Faster Protection Device displays an “No encoder input LAF” Alarm, it means there's no signal from the LAF flow sensor. To fix this, replace the LAF sensor.
Guidelines for inspecting the cabinet upon arrival to identify any transport damage.
Specifies environmental conditions and placement needs for optimal cabinet performance.
Details on connecting the cabinet to electrical power and gas/vacuum networks.
Defines the intended use and international standards met by the cabinet.
Describes the systems used to maintain constant airflow velocity, including manual and automatic options.
Lists and describes all symbols and controls present on the cabinet's control panel.
Details on accessing and navigating the optional operator menu for settings and configurations.
Information on the correct disposal of electric and electronic devices and contaminated materials.
Crucial precautions, including handling pathogenic materials and avoiding corrosive substances.
Essential checks to perform before operating the cabinet to ensure readiness and safety.
Detailed procedure for powering on the cabinet and preparing it for use.
Instructions for safely shutting down the cabinet at the end of a work session.
Daily cleaning procedures for the cabinet's exterior and interior surfaces.
Instructions for users on how to clean the pre-filters monthly.
Procedure for replacing the HEPA filter, to be performed by qualified technical personnel.
Instructions for technical personnel to replace the motor-fan unit.
User-level instructions for replacing the fluorescent lighting lamps.
User-level instructions for replacing the optional UV germicidal lamp.
A comprehensive list of available spare parts for the FlowFAST H cabinet.
Details the warranty period and conditions for the FlowFAST H cabinet.
Information on how to contact technical assistance or distributors for support.
Frontal view of the cabinet showing useful and overall dimensions.
Side view of the cabinet with detailed dimensions and component labels.
General| Brand | Faster |
|---|---|
| Model | FlowFAST H |
| Category | Protection Device |
| Language | English |
To Next Page