Faster FlowFAST H - 11 Transport, Packing, and Storage

To Next Page

To Previous Page

a D:GROUP company

00020EN Rev.09 – 12/2012 28

11 TRANSPORT, PACKING and STORAGE INSTRUCTIONS

IMPORTANT: Disconnect power and sterilize the bench before doing any of following

operations.

The following instructions will be essential if the end user needs to transport, pack or store a cabinet after a period of

routine use (e.g. laboratory/plant relocation):

Disconnect tubes for gas/vacuum

If the cabinet is to be moved from one laboratory to another within the same building:

on a table with wheels: it is sufficient to put the cabinet on the table; do not place it on one side or on the

back panel.

by a forklift: put the cabinet on a pallet to ensure good stability and to protect the basin under the cabinet

against damage in transport.

It is important to check if the assembled cabinet can get through the doorway, elevator or anything else without any

problem. In case the cabinet overall dimensions are greater than doorways or anything else (which usually

happens), is necessary to dismantle the cabinet in three sections:

[1] main unit

[2] work surface

[4] safety glass side panels

[21, 22, 23] shutter, slide guide and stirrup for shutter hooking

For disassembling operations please refer to chapter 10 - "Assembling and Disassembling Instructions"

Take care not to damage protruding parts (e.g.: key switch, gas/vacuum taps, exhaust duct when passing through

doors/windows

If the cabinet is kept temporarily unused at final destination, cover the cabinet with a protective film (bubble cover)

taking care to protect also the exhaust duct, especially from dust.

We recommend extreme caution in long-distance moving carried out by forwarding agents (e.g. change of address):

we suggest that you use the original packaging supplied by the manufacturer with the cabinet. Packaging

characteristics:

Wooden pallets of the following dimensions:

FLOWFAST H 09 : 111 x 83,5 x 12 cm

FLOWFAST H 12 : 142,5 x 87,5 x 12 cm

FLOWFAST H 15 : 204 x 83 x 12 cm

FLOWFAST H 18 : 204 x 83 x 12 cm

Cardboard base to be laid on the pallet of the following dimensions:

FLOWFAST H 09: 79,5 x 108 x 1 cm (thick)

FLOWFAST H 12 : 138,5 x 83,5 x 1 cm (thick)

FLOWFAST H 15 : 79,5 x 199,5 x 1 cm (thick)

FLOWFAST H 18: 79,5 x 199,5 x 1 cm (thick)