a D:GROUP company
00020EN Rev.09 – 12/2012 14
U.V. LAMP RESIDUAL LIFETIME:
• use "UP/DOWN arrow" keys [5/6] to choice the desired menu
• select “U.V. LAMP RESIDUAL LIFETIME.” and press "SET" [10] key; the display will show:
U.V. LAMP RESIDUAL LIFETIME
set XXXX
• where XXXX shows the number of the hours set for lifetime of the U.V. lamp.
• Use the “up and down arrow” keys to adjust the hours parameter
• Then press the "SET" key [8] to confirm the data and/or go back to previous menu
• To conclude programming, press ESC” [7] key.
FILTERS RESIDUAL LIFETIME:
• use "UP/DOWN arrow" keys [5/6] to choice the desired menu
• select “FILTERS RESIDUAL LIFETIME.” and press "SET" [8] key; the display will show:
FILTER 1 RESIDUAL LIFETIME
set XXXX
where XXXX shows the number of the hours set for lifetime of the FILTER 1
• Use the “up and down arrow” keys to adjust the hours parameter
• Then press the "SET" key [8] to confirm the data and pass to filter 2 and so on up to filter 5 (as for
relation between number and type of filter see table par. 4C)
• To conclude programming, press ESC” [7] key.
LANGUAGE SELECTION
• use "UP/DOWN arrow" keys [5/6] to choice the desired menu
• select “LANGUAGE” and press the “SET” key and the following message will be shown on the display:
LANGUAGE
English
• With the “up and down arrow” keys select the desired language (Italian, English, French, German,
Spanish).
• Press the “SET” key to confirm and exit the “LANGUAGE” menu.
• press “ESC” [7] keyto go out.
To Next Page
Loading...