Process Controllers
FAST Lit. Part No. 229-51311 Rev. E (MANAGER) 24SEP2010 Page 5
2005-2010 Food Automation – Service Techniques, Inc. All Rights Reserved
This document contains confidential information. The dissemination, publication,
copying, or duplication of this document without prior written authorization is
strictly prohibited.
Using the (FASTRON.) VC-210 Controller:
Operational Test Procedure
Plug fryer into electrical source
NOTE: This scrolling can be bypassed by pressing SCAN.
The controller will scroll through the following:
a. Appliance Type
b. Software #
c. Download #
d. Current Date
e. Time of Day
f. SCK Address
g. “COOL”
Turn the fryer power switch on.
Press the EXIT COOL key once.
Press any illuminated product key.
The cook cycle will count down in the display.
NOTE: A cook cycle can be canceled by pressing and holding the active product key for 3 seconds. Pressing
the product key for less than 3 seconds will not cancel the cook cycle.
If the cycle is canceled during the first 25% of the cook time, the cook cycle simply gets canceled and the
display shows either “COOL” or the actual temperature, depending on the appliance. Canceling the cycle
during the last 75% of the cook time will either put the controller in the filter mode or subtract one from its
cycle count toward filter lockout.
To Next Page
Loading...
