Process Controllers
FAST Lit. Part No. 229-51311 Rev. E (MANAGER) 24SEP2010 Page 6
2005-2010 Food Automation – Service Techniques, Inc. All Rights Reserved
This document contains confidential information. The dissemination, publication,
copying, or duplication of this document without prior written authorization is
strictly prohibited.
Operating the (FASTRON.) VC-210 Controller
RECIPE REVIEW — Quickly see what is programmed for each product key
1. Press the SCAN key.
2. Select any product key previously programmed–LED will be lit above the key.
3. Press the DOWN arrow key to scroll through the list.
4. Press SCAN to exit.
VIEW TEMPERATURE SETTING
1. Press the TEMP key ‘once’ to view Actual temperature, or
2. Press the TEMP key ‘twice’ to view Set temperature.
ACTIVATING THE POLISH FEATURE
1. To Polish ‘NOW’, press and hold the EXIT COOL and EXIT FILL keys at the same time.
2. To Polish ‘LATER’, press and hold the SCAN and EXIT FILL keys at the same time. NOTE: Polish
will only be delayed IF a non-zero polish delay time is set.
DISPLAY TIME OF DAY—2 second display of the current time of day. NOTE: Can only be done if the
controller is at COOL or idle mode.
1. Press and hold the SCAN and EXIT COOL keys at the same time.
DISPLAY APPLIANCE TYPE AND DOWNLOAD INFORMATION—2 second scrolling display of the
Appliance Type, Software #, Download #, Current Date, Time of Day and SCK Address.
1. Press the SCAN and TEMP keys at the same time.
To Next Page
Loading...
Need help?
General
