FCI WATERMAKERS, INC. 63Operational Instructions
V4 CONTROL SYSTEM OVERVIEW
e V4 Control System was specially designed by FCI Watermakers for our
reverse osmosis systems. e system is designed to be run either locally
via the display, or remotely via remote display or remote IP access.
e V4 Control System continuously monitors all inputs and
controls all outputs for proper machine operation,
e Control System is designed to make machine operation as simple as
possible for the operator. Once the operator places the machine into production
with the appropriate setpoints, the Control System automatically sequences
all controlled devices in order to ensure the proper amount of fresh water
is delivered. In addition, water quality, ow rates, lter life, pressures, and
pump status are all monitored to ensure safe and reliable operation.
All operation, machine setup, and calibration is performed via the display, with factory
default settings stored permanently in the system in addition to a user savable settings.
SAFETY
e V4 Control System has four dierent processes to ensure the safety
of the personnel operating the unit and also the unit itself. e process
the V4 Control System uses depends on the severity of the issue.
• Notication
•
W
arning
• Alarm
•
S
hutdown
To Next Page
Loading...
