FCI WATERMAKERS, INC. 99Maintenance & Repair
e following steps ensure that potential problems
are resolved, preventing major repairs:
1 Inspect all fasteners for tightness, including brackets, screws, nuts,
and bolts. Pay special attention to the high pressure pump and
electric motor since they are subject to increased vibration.
2
C
lean any salt water or salt deposits from the system with a wet rag.
3
C
heck for water leaks throughout the system and supporting water lines.
4 Check all tubing and high‑pressure hoses for wear and abrasion against
rough surfaces. e hoses must not contact heated or abrasive surfaces.
WEEKLY QUICK CHECK
To Next Page
