Need help?Do you have a question about the FCI Watermakers MAX-Q+ and is the answer not in the manual?
General| Brand | FCI Watermakers |
|---|---|
| Model | MAX-Q+ |
| Category | Water Filtration Systems |
| Language | English |
Outlines the warranty coverage and periods for system components.
Covers storage guidelines and handling precautions before installation.
Warns about chemicals that can damage the RO membrane element.
Highlights warranty voiding due to improper chemical use.
Lists prerequisites before starting the installation process.
Specifies required technical knowledge and abilities for installation.
Instructions for mounting the system components.
Details the plumbing connections and diagrams for installation.
Guides on connecting the system's electrical wiring.
Provides a checklist for verifying successful installation.
Details the procedure for initial system startup and shutdown.
Details the initial priming sequence of the system.
Explains the initialization sequence before the system runs.
Describes the system's operation after initialization and stabilization.
Details the process for fresh water flushing the system.
Lists alarms and their causes, with procedures to clear them.
Details shutdown causes and procedures to clear them.
Warns against using chemicals that can damage the system.
Details maintenance and repair for the low-pressure pump.
Explains pre-filter maintenance and replacement.
Details maintenance and repair for the high-pressure pump.
Detailed steps for cleaning the system with high and low pH cleaners.
Table listing problems, probable causes, and solutions.
Troubleshooting specific issues related to the high pressure pump.
To Next Page
