FEC FEB-9455 - Onchip Ide Device

FEB-9455 User’s Manual
26
□ OnChip IDE Device
Press <Enter> to set IDE and SATA device configuration.
Item Help
Menu Level
↑↓ ←→
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
IDE HDD Block Mode
IDE DMA transfer access
On-Chip Primary PCI IDE
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
On-Chip Secondary PCI IDE
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
*** On-Chip Serial ATA Setting ***
On-Chip Serial ATA
SATA PORT Speed Settings
PATA IDE Mode
SATA Port
Phoenix – AwardBIOS CMOS Setup Utility
OnChip IDE Device
If your IDE hard drive
supports block mode
select Enabled for
automatic detection of
the optimal number of
block read/writes per
sector the drive can
support
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
[ Enabled ]
[ Enabled ]
[ Enabled ]
[ Auto ]
[ Auto ]
[ Auto ]
[ Auto ]
[ Enabled ]
[ Auto ]
[ Auto ]
[ Auto ]
[ Auto ]
[ Combined Mode ]
Disabled
[ Secondary ]
P0,P2 is Primary
x