EasyManua.ls Logo

FEC FEB-9455 - Pnp;Pci Configurations

Default Icon
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FEB-9455 Users Manual
33
2.7 PnP/PCI Configurations
Item Help
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Reset Configuration Data
Resources Controlled By
IRQ Resources
Phoenix AwardBIOS CMOS Setup Utility
PnP / PCI Configurations
x
[ Disabled ]
[ Auto(ESCD) ]
Press Enter
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Menu Level
Default is Disabled.
Select Enabled to
reset Extended System
Configuration Data
ESCD) when you exit
Setup if you have
installed a new add-on
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot
Reset Configuration Data
Select Enabled to reset Extended System Configuration Data (ESCD) when you exit
BIOS setup utility, if you have installed new add-on card and the system
reconfiguration has caused such a serious conflict that the OS cannot boot.
Resources Controlled By
BIOS can automatically configure all the boot and Plug and Play compatible devices.
If you choose Auto, you cannot select IRQ DMA and memory base address fields,
since BIOS automatically assigns them.