PRO-REVERB AMP
SPECIFICATIONS
Product Release No.: PR 448 (This is not a model number)
Part Number: 120V Version : 21-5500
240V Aus : 21-5530
230V UK : 21-5540
230V Eur : 21-5560
100V : 21-5570
Power Requirements: 325W
Power Amp Section:
Power Output: 50 Watts RMS (High Output)
12.5 W RMS (Low Output)
1kHz sine wave into 8Ω @<5% THD (Presence @ “1”)
Input impedance: 1MΩ
Tubes: Two 6L6GC (P/N 053980)
Two 12AX7A (P/N 023572)
Five 12AX7WA (P/N 013341)
One 12AT7 (P/N 023531)
Fuses: F200: F3A 250V (100V, 120V units)
T2A 250V (230V, 240V units)
F201: T5A 250V (Internal filament fuse on 230V, 240V units)
F1 & F2: T100mA 250V (all units)
Speaker Complement: One 8 Ω Jensen C12N 12" (P/N 057065)
Footswitch: Four-Button: Channel, Effects, Reverb, Tremolo (P/N 057025)
Dimensions: Height:17 3/8" (44.3 cm)
Width: 25 3/8" (64.7 cm)
Depth: 12 27/32" (32.8 cm)
Weight: 75 lbs. (34 kg)
Product specifications are subject to change without notice
To Next Page
Loading...
