When the light is switched on, press and hold the functional switch for 0.5 seconds to enter
strobe, single click again to turn back to general mode.
Output Selection
When the light is switched on, single click the functional switch to cycle through Turbo→ Eco→
Low→ Med→ High.
Intelligent Memory Circuit
The light memorizes the last selected output excluding strobe. When turned on again the
previously used output of general mode will be recalled.
Battery Specifications
Type Dimensions
Nominal
Voltage
Usability
Fenix ARB-L16 Series 16340 3.6V Recommended √√
Non-rechargeable Battery
(Lithium)
CR123A 3V
Usable(no
charging)
√
Rechargeable Battery
(Li-ion)
16340 3.6V/3.7V Caution*
！
* 16340 Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution
and handled with care. Only use quality batteries with circuit protection will reduce the potential for combustion
or explosion; but cell damage or short circuiting are potential risks the user assumes.
Battery Replacement
Unscrew the light tail and insert the battery with the anode side (+) towards the light head,
To Next Page
Loading...
