Pag 11
If once the user codes have been programmed their length
is changed to include a fewer number of digits, the existent
codes will have the last digits removed to bring them in line
with the new length.
e.g. User Code:
- 6 digits: 123456 => select a fewer nº of digits.
For example: 4
- 4 digits: 1234
If additional digits are to be re-added to the existing codes,
the original digits will automatically be re-added.
e.g. User Code:
- 4 digits: 1234 => select a greater nº of digits.
For example: 6
- 6 digits: 123456
Each time the code length is changed, the existing codes
should be reset to avoid the codes being deleted or
overwritten. The confi guration of “code length” should
be done before setting up the codes on the system.
This will also effect the MASTER Code and the Free Access
Code.
To Next Page
Loading...